€17,32 – €59,54 Tax compris
| Code | D | F | FT | Z | K | P | A | B | Prix | Stock | Action |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 290.150.12H | 150 mm. | 20 mm. | 12 | 2,4 mm. | 1,4 | 20° ° | 10° ATB | €18,54 Tax compris (19 pt) |
10+ | ||
| 290.160.12E | 160 mm. | 16 mm. | 12 | 2,2 mm. | 1,6 | 20° ° | 10° ATB | €17,32 Tax compris (17 pt) |
10+ | ||
| 290.160.12H | 160 mm. | 20 mm. | 2/6/32 | 12 | 2,2 mm. | 1,6 | 20° ° | 10° ATB | €20,37 Tax compris (20 pt) |
10+ | |
| 290.180.12M | 180 mm. | 30 mm. | 2/7/42 | 12 | 2,6 mm. | 1,6 | 20° ° | 10° ATB | €20,62 Tax compris (21 pt) |
10+ | |
| 290.190.12M | 190 mm. | 30 mm. | 2/7/42 | 12 | 2,6 mm. | 1,6 | 20° ° | 10° ATB | €22,81 Tax compris (23 pt) |
10+ | |
| 290.200.24M | 200 mm. | 30 mm. | 2/7/42 | 24 | 2,8 mm. | 1,8 | 20° ° | 10° ATB | €36,23 Tax compris (36 pt) |
10+ | |
| 290.210.24M | 210 mm. | 30 mm. | 2/7/42 | 24 | 2,8 mm. | 1,8 | 20° ° | 10° ATB | €36,23 Tax compris (36 pt) |
10+ | |
| 290.216.24M | 216 mm. | 30 mm. | 2/7/42 | 24 | 2,8 mm. | 1,8 | -5° ° | 15° ATB | €36,23 Tax compris (36 pt) |
10+ | |
| 290.220.24M | 220 mm. | 30 mm. | 2/7/42 | 24 | 2,8 mm. | 1,8 | 20° ° | 10° ATB | €36,23 Tax compris (36 pt) |
10+ | |
| 290.230.24M | 230 mm. | 30 mm. | 2/7/42 | 24 | 2,8 mm. | 1,8 | 20° ° | 10° ATB | €37,45 Tax compris (37 pt) |
10+ | |
| 290.235.24L | 235 mm. | 25 mm. | 24 | 2,8 mm. | 1,8 | 20° ° | 10° ATB | €32,33 Tax compris (32 pt) |
10+ | ||
| 290.235.24M | 235 mm. | 30 mm. | 2/7/42 | 24 | 2,8 mm. | 1,8 | 20° ° | 10° ATB | €37,45 Tax compris (37 pt) |
10+ | |
| 290.240.24M | 240 mm. | 30 mm. | 2/7/42 | 24 | 2,8 mm. | 1,8 | 20° ° | 10° ATB | €38,92 Tax compris (39 pt) |
10+ | |
| 290.250.24M | 250 mm. | 30 mm. | COMBI3 | 24 | 2,8 mm. | 1,8 | 20° ° | 10° ATB | €49,90 Tax compris (50 pt) |
10+ | |
| 290.260.28M | 260 mm. | 30 mm. | COMBI3 | 28 | 2,8 mm. | 1,8 | 20° ° | 10° ATB | €59,54 Tax compris (60 pt) |
10+ | |
| 290.270.28M | 270 mm. | 30 mm. | 2/7/42 | 28 | 2,8 mm. | 1,8 | 20° ° | 10° ATB | €59,41 Tax compris (59 pt) |
10+ |
CARACTERISTIQUES TECHNIQUES DES DENTS EN HW :
| -Hauteur de dent en mm : | 6~8 |
| -Qualité ISO : | K10 |
| -Dureté (HV10) : | 1.765 |
| -Résistance (N/mm2) : | 2.150 |
| Lames de qualité industrielle : | 290.250.24M |
| 290.270.28M |
Excellente coupe en longueur sur bois.
